# \#uk

**URL:** https://openflexure.discourse.group/tag/uk/3.md

[Latest](https://openflexure.discourse.group/latest.md) · [Categories](https://openflexure.discourse.group/categories.md) · [Tags](https://openflexure.discourse.group/tags.md)

---

## [Is there a Openflexure mirror that comes with Python 3.9/64-bit architecture preconfigured?](https://openflexure.discourse.group/t/is-there-a-openflexure-mirror-that-comes-with-python-3-9-64-bit-architecture-preconfigured/1904)

<div class="topic-metadata">

**Author:** [@engpol](https://openflexure.discourse.group/u/engpol)\
**Replies:** 7\
**Last updated:** [25 February 2025 08:25 UTC](https://openflexure.discourse.group/t/is-there-a-openflexure-mirror-that-comes-with-python-3-9-64-bit-architecture-preconfigured/1904 "2025-02-25T08:25:07Z")

</div>

Hi not sure if anyone has asked about this before but it’s been causing me a bit of a headache the last couple of days. I am trying to write some python code which will use the cellpose package for image segmentation of…

---

## [Stepper motors buzzing but not turning with sangaboard v5.5](https://openflexure.discourse.group/t/stepper-motors-buzzing-but-not-turning-with-sangaboard-v5-5/1945)

<div class="topic-metadata">

**Author:** [@Wocsnia](https://openflexure.discourse.group/u/Wocsnia)\
**Replies:** 5\
**Last updated:** [31 January 2025 18:53 UTC](https://openflexure.discourse.group/t/stepper-motors-buzzing-but-not-turning-with-sangaboard-v5-5/1945 "2025-01-31T18:53:53Z")

</div>

Hi, I have built a microscope out of curiosity and out of the standard parts listed on the website. I decided to buy he sangaboard v0.5.5 from the preferred supplier. I cannot, however get the steppers to turn. The buz…

---

## [OpenFlexure v7 - Is Top Layer Pillowing an issue?](https://openflexure.discourse.group/t/openflexure-v7-is-top-layer-pillowing-an-issue/1862)

<div class="topic-metadata">

**Author:** [@engpol](https://openflexure.discourse.group/u/engpol)\
**Replies:** 3\
**Last updated:** [4 December 2024 10:36 UTC](https://openflexure.discourse.group/t/openflexure-v7-is-top-layer-pillowing-an-issue/1862 "2024-12-04T10:36:29Z")

</div>

Hello everyone, I’ve recently started my first build of the OpenFlexure v7. After getting the leg\_test print bridges looking ok, I decided to do a couple test prints of the condenser and stage clips. While they seem to …

---

## [Need Help installing software on the Raspberry Pi 4 model B & Sangaboard 0.5.1](https://openflexure.discourse.group/t/need-help-installing-software-on-the-raspberry-pi-4-model-b-sangaboard-0-5-1/1206)

<div class="topic-metadata">

**Author:** [@BRENDY77](https://openflexure.discourse.group/u/BRENDY77)\
**Replies:** 3\
**Last updated:** [12 April 2023 16:07 UTC](https://openflexure.discourse.group/t/need-help-installing-software-on-the-raspberry-pi-4-model-b-sangaboard-0-5-1/1206 "2023-04-12T16:07:13Z")

</div>

Hi All, I have Built the V7 Low-Cost Openflexure Microscope, however, I have never used a Raspberry Pi before or a Sangaboard. Can anybody help me to get the software working step by step from the start and what equipme…

---

## [OpenFlexureCon 2022](https://openflexure.discourse.group/t/openflexurecon-2022/887)

<div class="topic-metadata">

**Author:** [@r.w.bowman](https://openflexure.discourse.group/u/r.w.bowman)\
**Replies:** 15\
**Last updated:** [1 November 2022 21:01 UTC](https://openflexure.discourse.group/t/openflexurecon-2022/887 "2022-11-01T21:01:02Z")

</div>

Dear All, I’m delighted to say that we will hold a workshop on the OpenFlexure Project in Bath this July. We’ve booked a venue from lunchtime on Monday 11th July until lunchtime on Wednesday 13th July. It would be lov…