# Upright v7.0.0-beta5 server 3.0.0beta1 + customizations

**URL:** <https://openflexure.discourse.group/t/upright-v7-0-0-beta5-server-3-0-0beta1-customizations/2536>\
**Category:** Build Reports\
**Created:** [4 September 2026 18:27 UTC](https://openflexure.discourse.group/t/upright-v7-0-0-beta5-server-3-0-0beta1-customizations/2536 "2026-09-04T18:27:06Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![WilliamW](https://yyz2.discourse-cdn.com/free1/user_avatar/openflexure.discourse.group/williamw/32/106_2.png) [@WilliamW](https://openflexure.discourse.group/u/WilliamW)\
**Post date:** [4 September 2026 18:49 UTC](https://openflexure.discourse.group/t/upright-v7-0-0-beta5-server-3-0-0beta1-customizations/2536/2 "2026-09-04T18:49:53Z")

</div>

> [@pondwind](#):
>
> - the route of the ribbon cable to the Pi camera doesn’t feel finished, it’s currently rubbing the edge of the slide as it routes down to the electronics. first I would probably turn the camera pcb 90 degrees as this seems to improve the routing of the ribbon cable to where it is located on the pi, then I may create some kind of shelf or conduit for it

Indeed! @zeus made a fantastic dragon drag chain ([Dragchain for Upright Highres OFM with V7-Parts](https://openflexure.discourse.group/t/dragchain-for-upright-highres-ofm-with-v7-parts/2264) )). That will need your skills in paint-on supports in Prysa Slicer.

---

_[View the full topic](https://openflexure.discourse.group/t/upright-v7-0-0-beta5-server-3-0-0beta1-customizations/2536)._